[cnc machining center] maintenance

January 24, 2023

The CNC Machining Center is a high-efficiency automated machine tool consisting of mechanical equipment "target=_blank> mechanical equipment and numerical control system for machining complex-shaped workpieces. The machining center is also called computer 锣. The machining center is equipped with a tool magazine with automatic tool change. The function is a CNC machine tool for multi-step machining after the workpiece is clamped once. The machining center is a highly electromechanical "target=_blank> mechatronics product. After the workpiece is clamped, the CNC system can control the machine tool to automatically select and replace according to different processes. Tool, automatic tool setting, automatic change of spindle speed, feed rate, etc., can continuously complete drilling, boring, milling, reaming, tapping and other processes, thus greatly reducing the auxiliary process of workpiece clamping time, measurement and machine adjustment. Time, the processing shape is more complex, the precision requirements are higher, and the parts with frequent varieties change have good economic effects.
CNC machining center regular maintenance project

1: Check the lubrication system, the status of the pressure gauge, clean the filter system of the lubrication system, replace the lubricating oil, and clear the oil passage;

2: Check the air circuit system, clean the air filter to eliminate leakage of pressure gas;

3: Check the fluid system, clean the filter, clean the tank, replace or filter the oil. Replace the seal if possible;

4: Fasten the transmission parts and replace the bad standard parts;

5: grease lubrication parts, as required, add grease;

6: Clean and clean each transmission surface;

7: Check the status of the tool magazine and robot, analyze the wear status of the robot, and propose replacement suggestions to the customer;

8: Repair and repair damaged parts of external components; cnc machining center manufacturer

9: Check the status of the hood. Accurately feed back information to customers;

10: Clean the electrical components in the control cabinet, check and tighten the fastening state of the terminal;

11: cleaning and cleaning the control system of the CNC system, circuit board, cleaning fan, air filter, cleaning the heat sink;

12: Clean the servo motor fan blades;

13: Clean the internal components of the operation panel, circuit board and fan. Check the fastening status of the connector;

Http://news.chinawj.com.cn Cnc machining center maintenance

Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn Cnc machining center maintenance

Связаться с нами

Author:

Ms. SU LAN RONG

Электронная почта:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822