Tianhui Machine Co.,Ltd

Главная> Блог> Introduction to the Drive and Control System of CNC Machine Tools

Introduction to the Drive and Control System of CNC Machine Tools

July 11, 2023

12 2

Servo Drive Computer Control System CNC Control Software

First, the composition of the computer numerical control system and the function of each part

For CNC machine tools, the control content mainly includes:
(1) Function control: Automatically read in the control information, so that the CNC system establishes the corresponding working status, thereby controlling the machine tool to perform corresponding actions. Such as lubrication, coolant supply, spindle motor on and off, speed, and coordinate axis function control.

(2) Position control: Control the position or trajectory of the relative motion of the tool and the workpiece. It is implemented by feeding the servo control system. Through the control of each coordinate axis, the tool moves according to the equation of the given curve to process the space curve (or surface) of the part.

(3) Signal processing: Analyze and process the status signal obtained during system operation and output the corresponding result. Such as: tool in place signal, workbench overtravel signal, and other detection signal input processing. Once the system gets these signals, the system will send out corresponding actions, such as the table overtravel protector alarm.

For the requirements of machine tool control functions, the computer numerical control system has corresponding function modules, and its composition principle is shown in Figure 4-1.

1

1. Input/Output Device Input Device: It is mainly used to input programs and data. Commonly used input devices: keyboards, optoelectronic input devices.

1

Output device: It is mainly used to provide various information and data to operators so that they can understand the control process in a timely manner. Commonly used output devices: Computer Numerical Control (CNC) devices such as printers, recorders, digital displays, CRT monitors, and paper tape punchers. It is a special-purpose computer that uses a stored program and is mainly used for numerical values ​​and Logical operations, real-time control of the machine. It consists of CPU, memory, input and output interface circuits and other components.

11211

Printer Recorder Digital Display CRT Monitor

3. Function of servo drive and position detection device: receiving the feed speed and displacement command signal from the CNC device, after being converted and amplified by the servo drive circuit (such as the speed control unit), the servo drive device (if using a DC servo motor) , Drive the table movement of the machine tool, at the same time by the displacement sensor to detect the actual position of the actuator, and feedback to the CNC device, to achieve closed-loop drive, so that the position of the machine tool feeding parts speed is accurately controlled.
4. Auxiliary function drive circuit This part realizes the information transmission and transformation of the CNC device and the machine power. Its role is to receive CNC signals, and the machine is used to control the spindle, lubrication, cooling, tool change and other motor operations and other auxiliary functions. In addition, some status information of the machine tool is transformed and sent to the CNC device, such as: tool in place, workbench overtravel, etc. In the high-end numerical control system, the control work of this part is completed by the "built-in type" programmable controller (PC) subordinate to the CNC device, or by the "universal" programmable controller independent of the CNC device ( PC) to complete.
5. CNC System Software The working process of the CNC system supports the entire process of the software with the support of the hardware. Part or all of the CNC functions are implemented by software.
Figure 4-2 is a schematic diagram of the Fujitsu CNC system. This system is a microcomputer CNC system, and the principle of the CNC system can be further understood through this schematic.
Microprocessor: M6800, 8-bit microprocessor. ROM storage control program, RAM storage intermediate data and user processing program, with input / output interface connected with the machine operator panel, tape reader, hand pulse generator, machine controller, DC servo motor drive, pulse encoder disk detection Displacement achieves position feedback. Large-scale integration (LSI) circuits implement interpolation operations and have a high speed of operation.

1

Second, the main features of the CNC system

The main features of the CNC system are the following five points.
1. The system is flexible and variable, easy to change and expand, and versatility is the most prominent feature of the CNC system. Unlike the hardware CNC, once a certain model and function are formed, it cannot be changed at will, because the connection between hardware is dependent on the The wiring is implemented. For the CNC system, as long as the structure of the software is changed, new functions can be added and developed at any time to adapt to different requirements.
2. Easy to implement multi-function Because the computer has a rich instruction system and can perform complex calculations, it is much more convenient to implement multi-function and high-complexity control than to use a hardware system. For example, high-order curve interpolation, tool radius compensation, multi-coordinated linkage control, and some CNC systems can also perform numerical control programming during control processing, which is not possible in hardware systems.
3. High system reliability In the hardware control system, the machining program is entered one by one by the reader, but the CNC system can input the machining program once into the memory, which can reduce input failures. Since the CNC system hardware is much less than the NC system, the error rate of the system components is also relatively reduced, making the system work stable and reliable. Because the functions of the CNC system are all realized by software, as long as the software is perfect, it will not be possible to generate software running errors in the continuous system work in the future. Therefore, the continuous failure-free time of the CNC system can reach tens of thousands of hours.
4. Easy maintenance Because the CNC system has strong functions, the system function is modular, and software fault diagnosis is used to make the CNC easy to repair.
5. The communication function of the CNC system With the development of manufacturing technology, the CNC system can be controlled centrally. This function is indispensable. For example, in DNC, FMS, and CIMS systems, communication between systems is required.

Связаться с нами

Author:

Ms. SU LAN RONG

Электронная почта:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

Популярные продукты
You may also like
Related Categories

Письмо этому поставщику

Тема:
Электронная Почта:
сообщение:

Your message must be betwwen 20-8000 characters

Связаться с нами

Author:

Ms. SU LAN RONG

Электронная почта:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

Популярные продукты

Главная

Product

Phone

О нас

Запрос

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Отправить